How to Upload Data to Wunderground From Davis Instruments Third Party

With a number of customers asking how to get their data from their Vantage Vue and Vantage Pro2's onto a third political party atmospheric condition network. We thought we would cover off how you can reach this using a 3rd party piece of hardware (Meteobridge) with either Weatherlink or WeatherlinkIP.

With this in mind nosotros will cover off on what to do once y'all receive your recently purchased Meteobridge to get your Vue or Pro2 uploading to a 3rd party network. In this instance nosotros will run through the steps of uploading your data to Wunderground.

The starting time step when y'all receive your Meteobridge is to ensure it includes the following components:
• TL-MR3020 Router – This will be flashed with the Meteobridge firmware
• Ethernet Cable
• USB cable and charger
• Instruction transmission

Once y'all accept ensured all components are there plug the Ethernet cablevision into the Meteobridge and then into a spare port on your Broadband router. You will then need to power the unit using the USB cablevision and charger. Your router will now automatically assign an IP address to the Meteobridge.

Y'all will now need to find the Meteobridge on your network, if they are on the aforementioned network a solid green status light will show and information technology confirms it has a connectedness with the cyberspace and you can now go almost finding the IP address it is on. The simplest method to achieve this is by way of Magicip and you can do this by following the link beneath:

http://magicip.meteobridge.com

If prompted for a Username and Password enter the following:
Username: meteobridge
Password: meteobridge

This will produce the following page showing yous which IP accost your Meteobridge is on:

Figure 1: MagicIP revealing which IP accost your Meteobridge is on

From the information above it can be seen that our Meteobridge is operating on 192.168.ane.63. In one case you have this information you can go about logging in to your Meteobridge by typing this into your browser. The login details will be every bit follows:

Username: meteobridge
Password: meteobridge

The next step is to connect your data logger, if you accept the USB version it will need to be plugged into the panel and then into the USB port of the Meteobridge. If yous are using WeatherlinkIP at that place are two means of connecting to the Meteobridge. The first is to connect the Ethernet cable from your WeatherlinkIP into your router and then the Ethernet cable from your Meteobridge to your router. Alternatively yous could setup your Meteobridge to run on Wireless LAN. For the Meteobridge direct to Wireless LAN using WeatherlinkIP you volition need to plug the console directly into the Ethernet port after setting up your Network settings inside the Meteobridge interface (this is covered afterwards the 2 images beneath):

Figure three: WeatherlinkIP to router and console to router

From here you demand to begin setting up your Meteobridge via the Web Interface, this is what yous logged into previously. The showtime step is to setup your network connection.  At Musical instrument Choice we decided on a Wireless LAN connection so that we didn't take to have the console housed in the server room out of sight; however you lot can choose to run it on a LAN network if this is suitable for your requirements. Our "Type of Connection" setup is shown below:

Figure 4: Network setup for WLAN

Once your details are entered into hither and pushed "Save and Apply and Reboot" and the router has come up back on and allowed you to login, you tin can now go into the "Select Station" tab. If you were looking to run your WeatherlinkIP wirelessly y'all tin now unplug the Meteobridge from the router and connect your WeatherlinkIP cable to the Meteobridge.

Under the "Select Station" tab you will need to select the station and type of Weatherlink hardware you are using. We used the Vantage Vue with Weatherlink for USB and this is reflected beneath:

Under this tab you can also alter your local settings to match your stations altitude and practice a pressure correction if required. You lot tin likewise select how oft historical data will be saved.

At that place is one terminal step in order to become your station onto a 3rd party Weather Network. Equally stated at the start of this article we put our station on Wunderground and in lodge to practice this you will need to take a Wunderground account. Once you have this go into the "Conditions Network" Tab in the Meteobridge setup card. Yous tin now input your Station ID and Password along with how oftentimes you wish to upload, our Weather Network settings are detailed below:

Figure 6: 3rd Party Weather Network settings to upload to Weather Undergroundmete

Once this is inputted and saved your information volition now begin uploading to the third political party Weather Network. Our Wunderground station can be viewed hither;

http://www.wunderground.com/personal-conditions-station/dashboard?ID=ISOUTHAU266

If y'all would similar to discuss getting your Vantage Vue or Vantage Pro2 onto a 3rd party Weather Network or would like to talk over our weather station options please feel complimentary to contact 1 of our friendly Scientists via electronic mail or phone on 1300 737 871. Past Daniel McGaffin

zimmermandued1938.blogspot.com

Source: https://www.instrumentchoice.com.au/how-can-i-get-my-davis-data-onto-a-3rd-party-network

Share this post